Floor grout is the material used to fill in the spaces between tiles. It is usually made of cement, sand, and water. Over time, floor grout can become stained and difficult to clean. Cleaning grout can be a difficult and tedious task, but it is essential to keep it clean to maintain the appearance of your tile floor. The good news is that there are several ways to clean floor grout and make it look new. Here are some of the easiest ways to clean grout.

Use Vinegar

Vinegar is a natural cleanser and the best homemade grout cleaner for cleaning grout on floors. It is simple to use, inexpensive, and effective at removing dirt and stains. Depending on the level of cleaning required, you can dilute the vinegar with water or use it at full strength.

Here are the steps to follow

• In a bowl, combine equal parts vinegar and water to clean the grout.

• Scrub the grout with a sponge or brush to remove dirt and stains.

• After cleaning the tile floor, thoroughly rinse the area with clean water.

Use Baking Soda

Baking soda is one of the most versatile and practical household cleaners. It works well on grout and can also help to clean ovens, refrigerators, and other appliances. It’s also a natural deodorizer, which can help eliminate bad smells in the home.

Here are the steps to follow:

• Mix equal parts of baking soda and water to form a paste to clean the grout with baking soda.

• Apply the paste to the grout lines and let it sit for a few minutes before scrubbing with a brush.

• Rinse with plain water and wipe dry.

• If the grout is still stained, you can try mixing baking soda with hydrogen peroxide to create a stronger paste.

• Apply the paste and let it sit for a few minutes before scrubbing and rinsing.

grout cleaning

Use Hydrogen Peroxide

Hydrogen peroxide is an all-purpose cleaner that you can use on most surfaces, and it’s effective at getting rid of dirt, stains, and grime. It’s safe to use around kids and pets and won’t harm your floors. Plus, it’s inexpensive and easy to use.

Mix equal parts of hydrogen peroxide and water in a spray bottle to clean floor grout with hydrogen peroxide.

Here are the steps to follow:

• Then, spray the solution onto the grout and let it sit for a few minutes.

• Next, use a brush to scrub the grout until it’s clean.

• Finally, rinse the area with water.

Chlorine Bleach

Chlorine bleach is one of the easiest way to clean grout floor. It is a powerful disinfectant and can quickly remove dirt, grease, and stains. However, it can also be harsh on your skin and eyes, so always take precautions when using it. You should also avoid using it on porous surfaces, as it can damage the material. If you’re looking for a gentler option, try making a paste out of baking soda and water.

Here are the steps to follow:

• Pour 1 gallon of warm water into a bucket.

• Add 1/4 cup of chlorine bleach to the water and stir.

• Put on rubber gloves and dip a sponge into the bleach solution.

• Rub the sponge over the grout lines, making sure to get into the nooks and crannies.

• Rinse the tile floor with clean water.

• Repeat this process as necessary until the grout is clean.

Steam Cleaner

If you are considering a chemical-free method to clean your floor grout, Steam cleaners are one of the best methods. They use hot water and high pressure to bust dirt and can also disinfect the grout. For perfect results, ensure your steam cleaner goes up to 200 °F (93 °C). However, go slow to ensure you get a good burst of steam on the grout. This is because the steam might not come out consistently.

Here are the steps to follow:

• Bring the steam wand to the grout lines and move it back and forth repeatedly to loosen up the dirt.

• Clean tough stains by holding the steam cleaner over them for a few minutes.

• Wipe away any residual dirt with a clean cloth.

• Repeat the process if necessary.

Lemon Juice or White Vinegar

If you’re looking for a natural and affordable way to clean your floor grout, lemon juice or white vinegar may be the best solution. These ingredients are acidic, which can break down dirt and grease build-up. They’re also both relatively safe to use around pets and children.

Here are the steps to follow:

• To make lemon juice or vinegar, combine them in a 1:1 ratio with water.

• For example, if you’re using 1 cup of lemon juice, mix it with 1 cup of water.

• Then, apply the mixture to your floor grout and let it sit for about 15 minutes.

• After 15 minutes, scrub the area with a brush or sponge

• Rinse the floor with clean water.

If you’re looking for an even stronger solution, you can try using full-strength lemon juice or vinegar. However, be cautious when using these ingredients at full strength, as they may damage some types of flooring; a good example is hardwood floors. If you’re unsure, test a small area first before applying the solution to your entire floor.

Grout Sealant and Colorant

Grout sealant and colorant are the two best ways to clean floor grout. When applied correctly, these products can help extend your grout’s life and keep it looking its best. It can also help to protect the grout from staining and fading, while colorant can help to change the color of your grout or hide any existing stains.

Squeaky Clean Floors

Grout is a porous material that quickly collects dirt, dust, and other debris. This can stain and disfigure the grout over time. Above are some of the best homemade grout cleaners available at home. If you have any questions or need assistance with your grout cleaning project, contact McFarland’s Flooring EnCounters.